Universal Accessory Bracket
Part # 41000
- 10-1/2” x 11-1/2” Base c/w 7/8” hole in center
- Fastens to horizontal tube on Safety Rack
- Fastens using sheet metal screws
|
|
Light Bracket (6-1/2" Base) Drivers Side
Part # 81001
- Backrack Drivers Side
- 6-1/2” Teardrop Base.
- Bolts to existing hole in upright.
- Hole in base center to run wiring through tube.
- Light sits atop upright post towards truck cab.
- Suitable for use with Toolboxes.
|
|
Light Bracket (6-1/2" Base) Passenger Side
Part # 81003
- Backrack Passenger Side
- 6-1/2” Teardrop Base.
- Bolts to existing hole in upright.
- Hole in base center to run wiring through tube.
- Light sits atop upright post towards truck cab.
- Suitable for use with Toolboxes.
|
|
Utility Light Bracket, Driver's Side, 10.5" Base
Part # 91001
- Backrack Drivers Side
- 10-1/2” Octagon Base.
- Bolts to existing hole in upright.
- Hole in base center to run wiring through tube.
- Light sits at cab height just behind Rack.
- May interfere with Toolbox opening fully.
|
|
Utility Light Bracket, Center Mount, 10.5" base
Part # 91002
- Backrack Center Mount
- 10-1/2” Base.
- Clamps to Flat Bar on Horizontal Assembly.
- Hole in base center to run wiring through.
- Can be used with Safety Rack using longer bolts.
- Light sits in center of cab in front of Backrack
|
|
Utility Light Bracket. Center Mount, 16" x 7" Base
Part # 91002REC
- Backrack Center Mount.
- 16” x 7” Base.
- Clamps to Flat Bar on Horizontal Assembly.
- Hole in base center to run wiring through.
- Can be used with Safety Rack using longer bolts.
- Light sits in center of cab in front of Backrack.
|
|
Utility Light Bracket, Passenger Side, 10.5" Base
Part # 91003
- Backrack Passenger Side
- 10-1/2” Octagon Base.
- Bolts to existing hole in upright.
- Hole in base center to run wiring through tube.
- Light sits at cab height just behind Rack.
- May interfere with Toolbox opening fully.
|
|
Arrow Stick Brackets, Pair
Part # 91004
- Brackets fasten to horizontal tube assembly using metal screws.
- Drilling required to fasten and locate Brackets.
- One pair of Z Brackets and fasteners included in package.
- Sliding Bolts in aluminum extrusion on Arrow Stick fasten to holes in Brackets.
- Arrow Stick sits just above horizontal tube assembly just behind the Backrack.
- Suitable for Backrack or Safety Rack.
- Compatible with 91002, 91002 REC, 91006.
|
|
Sport Light Brackets, Pair
Part # 91005
- Suitable for Backrack only.
- One pair of L Brackets and fasteners in package.
- Bolts to existing holes in upright.
- Places lights at cab height beside each upright tube.
- 7/16” hole on horizontal flatbar to mount stud mounted lights.
- Uses same holes in upright as other Brackets.
- Each upright can only accommodate one Bracket of any kind.
|
|
Light Bar Brackets (pair)
Part # 91006
- One pair of heavy L Brackets and fasteners in package.
- Clamps to horizontal tube assembly.
- Can be drilled and bolted directly to face of uprights if desired.
- Places Light Bar base even with tops of upright posts.
- Clamping installation suitable for Backrack only.
- Provides base to sit Light Bar on.
- Holes punched in L Brackets. May require drilling to fasten certain Light Bars.
|
|
Utility Light Bracket. Driver's side or Passenger's Side, 16" x 7" Base
Part # 91007
- Backrack Drivers and / or Passenger Side.
- 16” x 7” Base
- Hole in base center to run wiring through.
- Bolts to existing holes in upright.
- Places light at cab height beside each upright tube.
|
|
Antenna Mounting Bracket
Part # 91008
- Backrack Drivers and / or Passenger Side.
- 7/8” Hole in 3-1/2” square base.
- Designed to accommodate two way communications antenna.
- Bolts to existing holes in upright.
- Places Antenna atop upright post.
|
|
Rear Bar
Part # Rear Bar
Click here for Rear Bar Application Chart
- Available only on trucks with Rear Stake Pockets
- Drops into Stake Holes
- Installs and removes in seconds for easy truck bed access
- Allows ladders and long loads to be carried
- Keeps your truck looking stylish vs. Fullsize ladder rack.
|
|
